Actuators, Vol. 14, Pages 522: Reliability Study of Low-Voltage Electrical Appliances in Transport Vehicles Under Variable-Load Conditions

Actuators doi: 10.3390/act14110522

Authors:
Lin Long
Shu Cheng
Wei Zhang
Min Yue

Low-voltage electrical appliances, represented by circuit breakers, contactors, and proximity switches, are widely used in various electrical control systems in transportation vehicles. During vehicle operation, engine vibrations, poor workplace balance, constantly changing operating directions, unbalanced transmission systems, emergency braking, and other factors can all cause variable loads. These variable loads may decrease the effectiveness of low-voltage electrical contacts; the failure rate of the low-voltage electrical appliances used in transportation vehicles is three times that of normal indoor low-voltage electrical appliances. This study analyzes the failure mechanism of low-voltage electrical appliances used in transportation vehicles and establishes a model for their reliability evaluation and prediction based on a variable-load data-driven approach. This variable-load data comes from the constructed simulated vehicle operation test platform. Nonlinear variable-load test data generated by simulation is collected through the test platform and is then processed. An evaluation feature dataset is constructed and input into the reliability evaluation and prediction model to obtain the remaining life of low-voltage electrical appliances. The analysis and verification of the predicted evaluation values and the real values detected through platform equipment showed that the accuracy of this model for these appliances based on the variable-load data-driven approach reached 94%, meeting the requirements of practical applications. This method used in this study to derive the model can provide a theoretical basis for online evaluation and prediction of low-voltage electrical appliance reliability for transportation vehicles. This can not only prevent vehicle failures and avoid sudden accidents, but also fully utilize the remaining life of low-voltage electrical appliances and reduce the cost of replacing them.

Source link

Lin Long www.mdpi.com