Applied Microbiology, Vol. 5, Pages 105: BioLumCity: 3D-Printed Bioluminescent Urban Tiles Employing Aliivibrio fischeri Bioink as Passive Urban Light

Applied Microbiology doi: 10.3390/applmicrobiol5040105

Authors:
Yomna K. Abdallah
Alberto T. Estévez
Aranzazu Balfagón Martin
Marta Serra Soriano

Integrating bioluminescent organisms as passive lighting sources in the built environment is currently a hot topic. However, there are several limitations facing the implementation and up-scaling of these naturally bioluminescent organisms in the built environment on architectural and urban scales, such as the scale, sensitivity, enclosure, and difficulty of maintenance. Moreover, there are complex technicalities and operational aspects of conventional bioreactors that host these bioluminescent agents, especially in terms of managing their recharge and effluent, not to mention their high maintenance cost. The current work offers a sustainable, stand-alone, bioluminescent urban screen system employing Aliivibrio fischeri CECT 524 bioink on 3D-printed customized scaffolds as bioreceptive panel design based on a field-diffusion pattern to host the bioluminescent bacterial bioink. The field-diffusion pattern was employed thanks to its proven efficiency in entrapment of the various microbial cultures. Three different growth media were tested for culturing Aliivibrio fischeri CECT 524, including Luria Bertani Broth (LB), the Tryptone Soy Broth (TSB), and the standard Marine Broth (MB). The results revealed that the Marine Broth (MB) media achieved the highest bioluminescent intensity and duration. The maximum light emission typically in range of ~490 nm of blue–green light captured by a conventional reflex camera (human eye vision) was observed for 10 consecutive days in complete darkness after 3–10 s, at a room temperature of 25 °C. This was visible mainly at the thin curvilinear peaks of the 3D-printed field pattern. P1 achieved the highest performance in terms of visible blue–green light, and a duration of 10 days of active bioluminescence was achieved without the need for refilling, thanks to the high number of peaks and narrow wells at <0.5 cm of its field-diffusion pattern. This study proves the efficiency of this biomimetic pattern in terms of the bioreceptivity of the bioluminescent bacterial bioink. Furthermore, the proposed 3D-printed urban screens proved their economic sustainability in terms of affordability and their minimized production processes, in addition to their easy maintenance and recharge. These results qualify these 3D-printed bioluminescent urban screens for easy and decentralized adoption and application on an architectural and urban scale.

Source link

Yomna K. Abdallah www.mdpi.com