Coatings, Vol. 15, Pages 911: Optimization of Multi-Objective Process Parameters and Performance Analysis of High-Speed Laser Cladding of TC4/AISI431 Composite Coatings

Coatings doi: 10.3390/coatings15080911

Authors:
Fumin Hong
Tianlu Wei

The authors of this paper investigated the process parameters of high-speed laser cladding of TC4/AISI431 composite coatings on the surface of C45 steel, choosing laser power, scanning speed, and TC4 addition as the experimental factors, and porosity, microhardness, and corrosion resistance as the target indices. A regression model was established based on the response surface methodology BBD, and the reliability of the model was analyzed using an ANOVA. Then, the WOA was used for multi-objective optimization. The optimal parameter set was determined as follows: a laser power of 5315 W, a scanning speed of 378 mm/s, and a TC4 addition of 3.6%. The microstructure and surface elemental composition of the coating were analyzed. The results showed that the porosity reduced by 60% and that the corrosion resistance improved by 79.98%, while the microhardness remained essentially unchanged.

Source link

Fumin Hong www.mdpi.com