Materials, Vol. 19, Pages 157: Strength and Ductility Enhancement in Coarse-Aggregate UHPC via Fiber Hybridization: Micro-Mechanistic Insights and Artificial Neural Network Prediction

Materials doi: 10.3390/ma19010157

Authors:
Jiyang Wang
Yalong Wang
Shubin Wang
Yijian Zhan
Yu Peng
Zhihua Hu
Bo Zhang

Incorporating coarse aggregates into ultra-high-performance concrete (UHPC-CA) can reduce material costs, yet reliably predicting its strength-related behavior and overall performance remains challenging. This study examines UHPC-CA through a two-stage orthogonal experimental program comprising 18 mixtures with coarse aggregate, fly ash, and hybrid fiber reinforcements (steel, polypropylene, and composite fibers). Microstructural characterization using scanning electron microscope (SEM) and X-ray computed tomography (X-CT) was conducted to assess interfacial features and crack evolution and to link these observations to the measured mechanical response. Experimentally, fiber reinforcement markedly enhanced post-cracking performance. Compared with the fiber-free control mixture, the optimal hybrid configuration increased flexural strength from 6.9 to 23.5 MPa and compressive strength from 60.1 to 90.5 MPa. The steel–composite fiber system outperformed the steel–polypropylene system, which is consistent with the tighter composite-fiber interfacial bonding observed by SEM/X-CT and supports the feasibility of partially substituting steel fibers. An artificial neural network (ANN) model trained on 50 mixtures and evaluated on 10 unseen mixtures achieved an R2 of 0.9703, an MAE of 1.22 MPa, and an RMSE of 2.11 MPa for compressive strength prediction, enabling sensitivity assessment under multi-factor coupling. Overall, the proposed experiment–characterization–modeling framework provides a data-driven basis for performance-oriented mix design and rapid screening of UHPC-CA.

Source link

Jiyang Wang www.mdpi.com