Processes, Vol. 14, Pages 333: Technoeconomic and Life Cycle Analysis of a Novel Catalyzed Process for Producing Ethylene from Waste Plastic

Processes doi: 10.3390/pr14020333

Authors:
Xiaoyan Wang
Md. Emdadul Haque
Chunlin Luo
Jianli Hu
Srinivas Palanki

Polyethylene is the most used plastic in the world, and over 90% of this plastic is ultimately disposed of in landfills or released into the environment, leading to severe ecological implications. In this research, the technoeconomic feasibility of upcycling low-density polyethylene (LDPE) to produce ethylene is studied. The catalytic conversion of LDPE to ethylene is considered in microwave heating mode and Joule heating mode. Experimental data is obtained under conditions where most of the upcycled products are in the gas phase. A flowsheet is developed that produces industrial quantities of ethylene for both heating modes. A technoeconomic analysis and a life cycle analysis are conducted and compared with the traditional ethane cracking process for producing ethylene. Simulation results indicate that the upcycling system exhibits a lower capital expenditure and a comparable operating expenditure relative to conventional ethane steam cracking while generating additional valuable co-products, such as propylene and aromatic hydrocarbons, leading to a higher net present value potential. Sensitivity analyses reveal that the electricity price has the most significant impact on both the net present value and levelized cost of production, followed by the low-density polyethylene feedstock cost. Life-cycle assessment reveals a substantial reduction in greenhouse-gas emissions in the upcycled process compared to the fossil-based ethane steam-cracking route, primarily due to the use of renewable electricity, the lower reaction temperature that reduces utility demand, and the use of plastic waste as the feedstock. Overall, the proposed process demonstrates strong potential for the sustainable production of ethylene from waste LDPE.

Source link

Xiaoyan Wang www.mdpi.com