Processes, Vol. 14, Pages 96: Regulating Bleeding and Surface Homogeneity of Cement Pastes: Comparative Mechanisms of Organic and Inorganic Thickeners

Processes doi: 10.3390/pr14010096

Authors:
Jingbin Yang
Shuang Zou
An Guo
Zhenping Sun

This study compares the mechanisms of organic (Hydroxypropyl Methyl Cellulose, HPMC) and inorganic (bentonite) thickeners in regulating the bleeding behavior and surface homogeneity of cement pastes. In situ low-field nuclear magnetic resonance (LF-NMR) was employed to monitor water migration, while X-ray diffraction (XRD), scanning electron microscopy (SEM), and carbonation tests were conducted to evaluate the property disparities between the top surface and bottom layers. Results indicate fundamentally different working modes: HPMC reduces bleeding by swelling to block capillary channels, exhibiting a saturation threshold at 0.2% dosage. Beyond this point, as the primary transport channels are effectively sealed, additional HPMC merely densifies the polymer “plugs” without further suppressing the bleeding rate. XRD and SEM analyses reveal that despite the reduction in total bleeding, HPMC-modified pastes still exhibit significant stratification; the top layer retains a loose, granular morphology with higher carbonation susceptibility compared to the dense bottom layer. In contrast, bentonite mitigates bleeding through a volume-filling mechanism and thixotropic structuring, demonstrating a continuous, dosage-dependent efficacy up to 1.2%. At a 0.6% dosage, bentonite effectively eliminates microstructural disparities, yielding a top surface with a dense matrix and hydration product distribution nearly identical to the bottom layer. These findings demonstrate that the specific inorganic thickener (bentonite) utilized in this work is more effective in restoring surface homogeneity and enhancing carbonation resistance than the evaluated organic polymer (HPMC).

Source link

Jingbin Yang www.mdpi.com