Sensors, Vol. 25, Pages 7473: Comparative Analysis of the Accuracy and Robustness of the Leap Motion Controller 2

Sensors doi: 10.3390/s25247473

Authors:
Daniel Matuszczyk
Mikel Jedrusiak
Denis Fisseler
Frank Weichert

Along with the ongoing success of virtual/augmented reality (VR/AR) and human–machine interaction (HMI) in the professional and consumer markets, new compatible and inexpensive hand tracking devices are required. One of the contenders in this market is the Leap Motion Controller 2 (LMC2), successor to the popular Leap Motion Controller (LMC1), which has been widely used for scientific hand-tracking applications since its introduction in 2013. To quantify ten years of advances, this study compares both controllers using quantitative tracking metrics and characterizes the interaction space above the sensor. A robot-actuated 3D-printed hand and a motion-capture system provide controlled movements and external reference data. In the central tracking volume, the LMC2 achieves improved performance, reducing palm-position error from 7.9–9.8 mm (LMC1) to 5.2–5.3 mm (LMC2) and lowering positional variability from 1.3–2.2 mm to 0.4–0.8 mm. Dynamic tests confirm stable tracking for both devices. For boundary experiments, the LMC2 maintains continuous detection at distances up to 666 mm, compared to 250–275 mm (LMC1), and detects hands entering the field of view from distances up to 646 mm. Both devices show reduced accuracy toward the edges of the tracking volume. Overall, the results provide a grounded characterization of LMC2 performance in its newly emphasized VR/AR-relevant interaction spaces, while the metrics support cross-comparison with earlier LMC1-based studies and transfer to related application scenarios.

Source link

Daniel Matuszczyk www.mdpi.com