Sustainability, Vol. 17, Pages 10135: Utilization of Construction and Demolition Waste in Concrete as Cement and Aggregate Substitute: A Comprehensive Study on Microstructure, Performance, and Sustainability

Sustainability doi: 10.3390/su172210135

Authors:
Ning Mao
Junfeng Zheng
Jun Jiang
Fengyuan Yang
Xiaoming Ying
Peng Ge
Li Zheng
Zhongyuan Lu

Construction and demolition waste (CDW) was successfully utilized as an aggregate with 100% replacement of natural aggregates and mineral admixtures, with up to 60% replacement of ordinary Portland cement (OPC) in the production of recycled concrete. The effects of ratios of concrete-based CDW (concrete-CDW)/brick-based CDW (brick-CDW) in both aggregates and CDW mineral admixture contents in the binder on recycled concrete were investigated in terms of their workability and compressive strength, microstructure, and sustainability. The results showed that with an increase in the ratios of brick-CDW/concrete-CDW aggregates, the concrete workability continuously deteriorated, while the compressive strength firstly increased and then decreased. Compared to the 100% dosage of concrete-CDW aggregates, the 28-day compressive strength of the recycled concrete was 37.4 MPa; the optimized relative proportions of brick-CDW and concrete-CDW aggregates were 20% and 80%, respectively; and the 28-day compressive strength was the highest, reaching to 46.7 MPa, and increasing by 24.9%. In a binder study, the microstructure of the paste was found to be improved, with the dosage of brick-CDW and concrete-CDW admixtures at up to 20%. In this range, the workability changed slightly when the relative proportion of brick-CDW admixture increased, the 28-day compressive strength of the recycled concrete increased, and the pore structure was refined. Furthermore, the utilization of a large amount of CDW as a mineral admixture and aggregate in concrete significantly reduced costs and CO2 emissions in different regions.

Source link

Ning Mao www.mdpi.com