Sustainability, Vol. 18, Pages 288: Environmental Footprint of 3D-Printed Concrete Using Recycled Materials
Sustainability doi: 10.3390/su18010288
Authors:
Claudia Muñoz-Sanguinetti
Mabel Vega-Coloma
Viviana Letelier
Madelyn Marrero
Rodrigo García-Alvarado
Paulina Wegertseder-Martinez
The construction sector undeniably has an impact on sustainability in its three dimensions: economic, social, and environmental. In this context, 3D concrete printing (3DCP) has emerged over the last decade as an attractive technology for transforming this sector. It enables the manufacture of construction elements while saving time, reducing waste, and eliminating the need for molds. However, assessments of the environmental performance of implementing this technology are limited, particularly under representative production conditions. This study evaluates the footprint family indicators, carbon footprint (CF), ecological footprint (EF), and water footprint (WF), of different mixtures of 1 m3 of 3D-printed concrete, with 1m of a high printed wall. These mixtures were made with a proportion of fresh solid aggregates; brick and concrete rubble (as demolition waste (CDW) materials) were used as partial replacements for cement. In addition, the environmental impact of using two printing technologies, gantry and robotic arm systems, is analyzed. The results show that materials are the main source of environmental impacts; the replacement of some of the cement reduces CF and EF by up to 20% and 19%, respectively, while preserving printability and buildability, as demonstrated by the stable fabrication of 1 m-high printed wall elements. However, moderate increases in WF were observed, which were associated with the electricity consumption of waste processing. These results confirm the potential for valorizing CDW in 3D printing mixtures. This environmental assessment under full-scale printing conditions supports sustainability-oriented decision-making in the construction industry.
Source link
Claudia Muñoz-Sanguinetti www.mdpi.com
